Sensors and Accessories

P-Pump Fuel Shutdown Solenoid Connector: Harness Side

SKU : 2074

No need to hard-wire your shutdown solenoid when you install this pigtail. Main power has an in-line fuse, secondary power requires a "key-on" power supply, and a ground; it's that simple!

Sensor Adapters - 1967-1997 Ford Gas & Diesel, 1999-2001 Ford Gas, and 1973-1987 Chevy (SKU 1031)

SKU : 1031

This bushing kit is for 1967-1997 Ford trucks and 1973 to 1987 Chevy trucks. It includes standard pipe fittings to install your stock gauge sending units into the Cummins engine, a 3/8" tee for power steering return hose (not used in all applications),...

Sensor Adapters - 1999-2002 Diesel & 2002-2007 Gasoline engines (SKU 1054)

SKU : 1054

This bushing kit includes a custom fitting for the o-ring style oil pressure sender, and a standard fitting for temperature sender, a 3/8" tee for power steering return hose (not used in all applications), Vacuum adapters (used in Gas applications). If...

Sensor Adapters - 2003-2010 Ford Diesel

SKU : 1136

This bushing kit includes custom fittings for both oil and temperature senders to install your stock gauge sending units into the Cummins engine. If your truck is a 2003-2010 6.0/6.4L Diesel order this kit. If your truck is a 2003-2010 5.4/6.8L Gas order...

Sensor Adapters- 1988-1999 Chevy

SKU : 2281

These adapter provide fitment of your Chevrolet sending units, such as Water Temperature & Oil Pressure, directly into the Cummins engine.

Swap Helper Tach Adapter - Including Pigtail

SKU : 2569

Provide a smooth, reliable tachometer signal to your Cummins converted truck. The SWAPHELPER is an electronic signal conditioning device. By utilizing the OEM Dodge Cummins tachometer sensor, whether cam or crankshaft position respectively, the...

SWAPHELPER- Tach Adapter not including pigtail *** IF NOT USING DCS WIRING YOU WILL NEED TO ORDER SKU 2569 (WITH PIGTAIL) INSTEAD***

SKU : 2330

Provide a smooth, reliable tachometer signal to your Cummins converted truck. The SWAPHELPER is an electronic signal conditioning device. By utilizing the OEM Dodge Cummins tachometer sensor, whether cam or crankshaft position respectively, the...

Tachometer Sensor - Ford 7.3L IDI Style

SKU : 1032

This sensor- together with our mount, base, and tach ring will generate a signal to make your factory tachometer work properly. This is a replacement sensor only. Ford 7.3L IDI style.

Throttle Position Sensor Bracket: Old Style

SKU : 1678

This throttle position sensor (TPS) bracket is needed for a 1994-1998 Cummins engine with the Dodge throttle linkage that previously had a manual transmission behind it. Please see the Automatic Transmission-Controller article for proper...

Throttle Position Sensor- 1994-1998 Dodge Cummins

SKU : 1500

This throttle position sensor (TPS) is for 1994-1998 12 valve Cummins engines with the Dodge throttle linkage. Bracket is also required when adding to an engine that previously had a manual transmission behind it in the Dodge.

VE Rotary Pump TPS bracket

SKU : 3124

This is a must have item for an electronic controlled transmission that requires a TPS input. This TPS Bracket is used for the 1989-1993 Dodge Cummins engines. We recently found that in order to get the TPS bracket and intermediate shaft from Dodge you...

Wiring - 1989-1998 Dodge Cummins TPS Connector Pigtail

SKU : 1378

This wire connector is useful whenever an electronically controlled automatic transmission* is used in a Cummins conversion, and the Cummins harness is not used or unavailable. The connector plugs into the Dodge Cummins TPS used on 1989-1998 models...