Parts

19” Stainless Flexible Turbo Oil Drain Tube

SKU : 2464

19 inch stainless turbo oil drain tube. This corrugated, flexible, stainless steel design allows easier installation for custom turbo orientation on non-stock exhaust manifolds. This drain line has 2 o-rings that push in the block. Existing hard line...

4" Exhaust Downpipe with 3" to 4" adapter and flange (SKU 3090)

SKU : 3090

Full 4" downpipe with flange and 3" to 4" adapter.

VE Pump Fuel Pin & Spring Kit - 1988-1993 Dodge Cummins 5.9L VE Pump Fuel Pin & Spring Kit - 1989-1993 Dodge Cummins 5.9L

SKU : 2274

Proven performance increases from a brand you know and trust, BD Power! Increases of 30-40 hp and 90-100 ft. lbs. of torque Increases power band by a whopping 30%! Made from high quality chromoly steel Pins heat treated to the 52 Rockwell hardness...

12 valve Cummins Exhaust Manifold Turbo Gasket Set

SKU : 1138

This gasket set is for 1989-1998 12 valve Cummins exhaust. Includes manifold to head and turbo to manifold gaskets.

12 Valve High Mount A/C bracket using GM alternator

SKU : 2300

DCS High Mount A/C is necessary for Chevy / GMC trucks that are 4WD with Independent Front Suspension (IFS) when using the DCS engine mounts. If you do not have the upper water neck that is pointing straight up (#3285102), you will need to change to...

12 Valve P-Pump Linkage Thread Adapters (Set of 3)

SKU : 3129

Some injection pumps from industrial applications have holes in the correct locations but the threads are much bigger than those used on injection pumps that were used in a Dodge truck. You will need to reduce the threads to 8mm if that is the case. This...

12 Valve P-Pump Throttle Linkage Kit

SKU : 1810

This kit is currently out of stock. Please call our team at 320.440.2900 if you'd like to get on the wait list to be notified when this kit is back in stock. Throttle linkage kit install the Dodge® Cummins® throttle linkage on a 12 valve...

12" Flexible Turbo Oil Drain Tube

SKU : 1301

The flexible stainless steel design allows easier installation for custom turbo orientation on non-stock exhaust manifolds. Existing hard line and rubber hose portion from original drain tube is required to complete the connection to the engine block. ...

1988-1999 Chevy Power Steering line to 12V Cummins (Hydroboost Trucks Only)

SKU : 2312

This is the factory power steering line that has been modified for proper fitment with a 12 Valve Cummins power steering pump. Please be advised you may modify your existing line, however it's very easy to pinch or kink the line causing a leak!

1989 - 2002 Cummins 1 Wire Alternator. 136A 1989-2002

SKU : 2462

1 wire, 136 amp alternator for 1989-2002 12 valve and 24 valve Cummins engine. Requires only one 12 volt power source. Built in regulator eliminates the use of an external regulator and associated wiring. If you desire a tach output from your alternator,...

1989-1998 Cummins 12 Valve 5.9 Crank Sensor and Bracket Kit

SKU : 2879

Everything you need to add a replace a crank sensor and bracket on your Cummins 12 Valve engine. This kit includes a billet almunimum mounting bracket that replicates the factory Dodge / Cummins mount (Cummins P/N 3924433) which is no longer available...

1989-2002 Cummins One Wire Alternator 136 Amp With Tach Output

SKU : 2516

1 wire, 136 amp alternator for 1989-2002 12 valve and 24 valve Cummins engine. Requires only one 12 volt power source. Built in regulator eliminates the use of an external regulator and associated wiring. This Alternator provides a "w" terminal for those...