Parts

Linkage Thread Adapters for Cummins® 12-Valve P-Pump, Set of 3 (SKU 3129)

SKU : 3129

Set of 3 linkage thread adapters for Cummins® 12-Valve P-Pump engines. Some injection pumps from industrial applications have holes in the correct locations but the threads are much bigger than those used on injection pumps that were used in a...

Lower Water Neck (SKU 3102)

SKU : 3102

This lower water neck points forward and down at a 45 degree angle. It is necessary if you are using one of our high mount A/C kits. Included is a gasket to seal this part to the engine block.

MPVI3® by HP Tuner® (SKU 2682)

SKU : 2682

MPVI3® by HP Tuners® Tuning Device is designed for enthusiasts and professionals for tuning. This is the fastest and most sophisticated OBDII interface device to date and is now standard with Pro Feature Set.  Includes standalone...

One Wire Alternator for 1989-2002 Cummins®, 136 Amp (SKU 2462)

SKU : 2462

One wire, 136 amp alternator for 1989-2002 12-Valve and 24-Valve Cummins® engines. Requires only one 12 volt power source. Built in regulator eliminates the use of an external regulator and associated wiring. If you desire a tach output from your...

One Wire Alternator for 1989-2002 Cummins®, 136 Amp with Tach Output (SKU 2516)

SKU : 2516

One wire 136 amp alternator for 1989-2002 12-Valve and 24-Valve Cummins® engines. Requires only one 12 volt power source. Built in regulator eliminates the use of an external regulator and associated wiring. This alternator provides a "w" terminal...

One Wire Alternator for 2003-2009 Cummins®, 136 Amp (SKU 2755)

SKU : 2755

One wire, 136-amp alternator for 2003-2009 Cummins® engines. Requires only one 12 volt power source. Built in regulator eliminates the use of an external regulator and associated wiring.

Pedal Module: 2003-2006 Cummins® 5.9L in 2003-2010 Ford® Super Duty® (SKU 2649)

SKU : 2649

Stand-Alone DCS Throttle Pedal Module, 2003-2006 Cummins in 2003-2010 Ford Super Duty The Stand-Alone DCS Throttle Pedal Module is available to customers choosing to not utilize DCS conversion wiring service. The module can be used in 2003-2010 Ford...

Pigtail: Cummins® P-Pump Fuel Shutdown Solenoid Connector, Harness Side (SKU 2074)

SKU : 2074

No need to hard-wire your Cummins® P-Pump fuel shutdown solenoid when you install this pigtail. Main power has an in-line fuse, secondary power requires a "key-on" power supply, and a ground; it's that simple!

Power Steering Bracket: 2008 - 2010 Ford® F450 & F550 using 2003 - 2009 Cummins® 5.9 & 6.7 Common Rail (SKU 2140)

SKU : 2140

This two piece bracket allows you to re-use your Ford power steering pump. This is beneficial in 2 ways; first is the Ford pump does not have a reservoir attached which saves space and second is retention of the Ford remote power steering fluid reservoir...

Power Steering Bracket: 2008-2010 Ford® F250 & F350 using 2003-2009 Cummins® Common Rail 5.9L & 6.7L (SKU 3073)

SKU : 3073

This two piece bracket allows you to re-use your Ford power steering pump. This is beneficial in 2 ways; first is the Ford pump does not have a reservoir attached which saves space and second is retention of the Ford remote power steering fluid reservoir...

Power Steering Line & Compression Coupler for 1989-2002 Cummins® 12-Valve & 24-Valve Steering Pumps (SKU 2351)

SKU : 2351

Dodge® Cummins® power steering pump to 3/8” steel line adapter. Features Designed for 1989-2002 Dodge Cummins 12-Valve and 24-Valve engines The tight 90° bend helps to clear engine mounts Includes a high-pressure compression...

Power Steering Line for 1988-1999 Chevy®/GM® to Cummins® 12-Valve, Hydroboost Trucks Only (SKU 2312)

SKU : 2312

This is the factory power steering line that has been modified for proper fitment with a Cummins® 12-Valve power steering pump. Please be advised you may modify your existing line, however it's very easy to pinch or kink the line causing a leak!