Parts

24 Valve GM High Mount A/C Kit

SKU : 2388

DCS High Mount A/C is necessary for Chevy / GMC trucks that are 4WD with Independent Front Suspension (IFS) when using the DCS engine mounts. Works with 1998.5-2002 24-Valve Dodge Cummins Engines Alternator bracket is designed to fit 1996 – 2000 Vortec...

24V Wastegate Actuator & Bracket

SKU : 2385

The 24V turbo can't be "clocked" or re-oriented due to the wastegate being mounted on the compressor side of the turbocharger. This kit allows the use of the stock turbo when using the DCS conversion friendly exhaust...

3 PIECE EXHAUST MANIFOLD FOR 1989-1998 DODGE CUMMINS 12V (SKU 3116)

SKU : 3116

EXHAUST MANIFOLD 12V 1994-1998 Dodge Cummins 12V. The DPS 3-Piece Manifold for the Dodge Cummins engine is both a great performance manifold and a factory replacement manifold. This manifold is designed to increase turbo spool-up, and exhaust gas...

4 3/8" Turbo V Band Clamp

SKU : 2602

Turbo to down pipe V band clamp. 4 3/8". Includes Nut.

5.9 Cummins 12 Valve Fuel Pump Delete Plate

SKU : 3139

6061 Billet Aluminum Fuel Pump Delete Plate for 12 Valve Cummins. Includes gasket and hardware. Made In USA

5R110 Transmission Tuning Service Using HP Tuners - Including Device and Credits

SKU : 2683

Complete 5R110 Transmission Tuning Service Using HP. Includes: DCS custom transmission tuning for diesel 5R110, HP MPVI3 Device and 2 Credits. ** Requires vehicle PCM to be re-flashed to stock and any previous tuning removed prior to DCS tuning...

6.0 & 6.4 Performance Replacement Clutch (SKU 1870)

SKU : 1870

This South Bend Clutch is for the Ford 6.0 & 6.4 ZF-6. This clutch requires a custom flyhweel and pilot bearing when used in a Cummins conversion. A Ford release bearing and clutch alignment tool is included.This clutch is rated for 475 hp and 1000...

6.0 & 6.4 ZF-6 Replacement Clutch (SKU 1868)

SKU : 1868

This South Bend Clutch is for the Ford 6.0 / 6.4 Diesel ZF-6 speed. This clutch requires a custom flyhweel and pilot bearing when used in a Cummins conversion. A Ford release bearing and clutch alignment tool is included. This clutch is rated for 400...

6.0 to 2003-2004 Cummins Pre-Made Conversion Harness (SKU 2807)

SKU : 2807

This is a completely new conversion engine harness. This is not a service. Designed to work with and connect to your factory C1 and C2 Dodge Cummins Engine Harness.

6.0 to 2005 Cummins Pre-Made Conversion Harness Includes New C2 Harness(SKU 2808)

SKU : 2808

This is a completely new conversion engine harness. This is not a service. Designed to work with and connect to your factory C1 Dodge Cummins Engine Harness. This harness is wired for the following sensors: Ford Coolant Temp Ford Oil Temp Ford Oil...

6.0 to 2006-2007 5.9 Cummins Pre-Made Conversion Harness, Includes New C2 Harness (SKU 2809)

SKU : 2809

This is a completely new conversion engine harness. This is not a service. Designed to work with and connect to your factory Dodge Cummins C1 Engine Harness. This harness is wired for the following sensors: Ford Coolant Temp Ford Oil Temp Ford Oil...

6.0L & 6.4L ZF-6 Performance Clutch (475hp and 1000ft/lbs torque)- Includes Flywheel. SKU#1871

SKU : 1871

This South Bend Clutch Kit is for Cummins conversions using the 03-10 Ford 6.0L and the 2008-2010 diesel ZF-6 speed. The kit includes a custom Dodge Cummins 6 speed flywheel, clutch, Ford release bearing, sealed ball bearing pilot bearing, and a...