Parts

Killer Dowel Pin Cover: 1994 - 1998 Cummins® 12-Valve & 24-Valve

SKU : 1900

If you have never heard of the Killer Dowel Pin in the 12 valve and 1998.5 - 2002 24 valve Cummins- it is a dowel pin right above the cam gear that is notorious for coming out of the engine block and falling down in the gears. When it does it usually...

Lower Water Neck

SKU : 3102

This lower water neck points forward and down at a 45 degree angle. It is necessary if you are using one of our high mount AC kits. Also included is a gasket to seal this part to the engine block.

New A/C Compressor for Dodge® Cummins®

SKU : 1386

This A/C Compressor will fit on all Cummins® engines with the correct bracket. Some 1993 and older Dodge® Cummins engines or industrial engines often need the correct mounting bracket. See Cummins Engine Information. 1 Year Manufacturer Warranty

New Style Water Neck

SKU : 1657

This thermostat housing, or water neck as they are also called, points toward the driver side of the engine. It is the same water neck that is commonly found on 1994-1998 Dodge Cummins engines and is the style you need if your upper radiator hose...

One Wire Alternator for 1989 - 2002 Cummins®, 136 Amp

SKU : 2462

One wire, 136 amp alternator for 1989-2002 12-Valve and 24-Valve Cummins® engines. Requires only one 12 volt power source. Built in regulator eliminates the use of an external regulator and associated wiring. If you desire a tach output from your...

One Wire Alternator for 1989-2002 Cummins®, 136 Amp with Tach Output

SKU : 2516

One wire 136 amp alternator for 1989-2002 12-Valve and 24-Valve Cummins® engines. Requires only one 12 volt power source. Built in regulator eliminates the use of an external regulator and associated wiring. This alternator provides a "w" terminal...

One Wire Alternator for 2003 - 2009 Cummins®, 136 Amp

SKU : 2755

One wire, 136-amp alternator for 2003-2009 Cummins® engines. Requires only one 12 volt power source. Built in regulator eliminates the use of an external regulator and associated wiring.

P-Pump Cummins® 12-Valve Throttle Linkage Kit

SKU : 1810

This kit is currently out of stock. Please call our team at 320.440.2900 if you'd like to get on the wait list to be notified when this kit is back in stock. Throttle linkage kit install the Dodge® Cummins® throttle linkage on a 12 valve...

P-Pump Cummins® 12-Valve Linkage Thread Adapters (Set of 3)

SKU : 3129

Some injection pumps from industrial applications have holes in the correct locations but the threads are much bigger than those used on injection pumps that were used in a Dodge truck. You will need to reduce the threads to 8mm if that is the case. This...

P-Pump Fuel Shutdown Solenoid Connector: Harness Side

SKU : 2074

No need to hard-wire your shutdown solenoid when you install this pigtail. Main power has an in-line fuse, secondary power requires a "key-on" power supply, and a ground; it's that simple!

Performance Clutch: Ford® 6.0L & 6.4L ZF-6 (475hp and 1000ft/lbs torque), Includes Flywheel (SKU 1871)

SKU : 1871

This South Bend Clutch Kit is for Cummins conversions using the 2003-2010 Ford 6.0L and the 2008-2010 diesel ZF-6 speed. The kit includes a custom Dodge Cummins 6 speed flywheel, clutch, Ford release bearing, sealed ball bearing pilot bearing, and a...

Power Steering Bracket: 2008 - 2010 Ford® F450 & F550 using 2003 - 2009 Cummins® 5.9 & 6.7 Common Rail (SKU 2140)

SKU : 2140

This two piece bracket allows you to re-use your Ford power steering pump. This is beneficial in 2 ways; first is the Ford pump does not have a reservoir attached which saves space and second is retention of the Ford remote power steering fluid reservoir...